Low-Low Alarm Limit. Alarming is used to notify operators and users of abnormal conditions in runtime VIEW. The tag must change BELOW the Low-Low Alarm Limit to be considered in the alarm state. The Low-Low alarm is in engineering units of the tag (not percent). This is similar to the Low Alarm. The Low-Low Alarm Limit must be less than the High Alarm and Low Alarm Limits. The Limit can be changed by users with 127security level in run-time VIEW. This field is for ANALOG tags and parameters only.
Range: -99,999,999,999 to 99,999,999,999 (but greater than ALMLO & ALMHI)
Units: same as Tag
Field Type: Analog
Tag fields: .ALMLL
See also, LO Alarm Limit