in the Taskbar (System Tray) next to the clock to open the Taskbar Icon.You cannot Start ViewDAQ unless a Project has been configured and Downloaded to the SCADA Node.
There are two ways to start ViewDAQ locally on the SCADA Node:
1. Start the SCADA Node kernel, if it is not already started.
2. Double Click on the Green Advantech WebAccess/SCADA Icon in the Taskbar (System Tray) next to the clock to open the Taskbar Icon.
3. Welcome to ViewDAQ appears without Toolbars (Figure 2-19).
4. Press the Enter key or Right Click the mouse to view the Main.bgr and toolbar.
Figure 2-19 ViewDAQ Welcome - no toolbar - Press Enter to continue
1. Start the SCADA Node kernel, if it is not already started.
2. Click the Green Advantech WebAccess/SCADA Icon in the Taskbar (System Tray) next to the clock to open the Taskbar Icon.
Figure 2-20 Start ViewDAQ from Taskbar Menu
3. Move the Mouse to the ViewDAQ menu item.
4. Click once on ViewDAQ.
5. Welcome to ViewDAQ opens without Toolbar (Figure 2-19).
6. Right Click or press Enter to view the Toolbar and Main.bgr
Note – if the Start-up Option in SCADA Node properties is Start Kernel and View, then ViewDAQ will start when the SCADA Node reboots.